Created with Sketch. Created with Sketch.

Shop by Brand

Drivetrain Parts

  • brake conversion kit assembled kit

    Deluxe rear disc brake conversion kit

    For years, the common disc conversion available for rear 8x6.5 lug pattern axles was a K20 front rotor and caliper or Eldorado caliper for adding a parking brake.  The OLD way: Single piston caliper  Marginal Parking Brake using caliper...

    Add to Cart
  • Black bezel 24v gauge


    24V Gauge for HMMWV and M35. Black bezel. May fit other military applications as well. WILL NOT FIT CUCV WITHOUT MODIFICATION TO DASH BEZEL!!!! Volt Gauge  PN: MS24532-2    NSN: 6625-01-086-9580 2-1/16" (52mm)

    Add to Cart
  • new u-bolt plates nos u-bolt saddle

    NOS GM 14 bolt U-bolt plate set

    NEW OLD STOCK!! New OEM u-bolt plates This is the plate that goes under the rear axle (GM 14 bolt) and accepts the U-bolts. (shown sandblasted w/ paint).  May fit other axles, but designed for a 3-3/8" tube and 2-1/2" wide springs.   These...

    Add to Cart
  • Vent cap for GM.  New!

    Breather Vent

    Breather vent cap.  This one-way valve is used to cap breather hoses for axles and transfer case.    Brand new!   replaces GM P/N 8640496   Ships USPS.

    Add to Cart
  • CUCV (K30) Swaybar bushing Kit

    CUCV (K30) Swaybar bushing Kit

    New Energy Suspension kit.  This will fit your M1008 and K30 swaybars and any application that uses the GM 1-1/4" front swaybar.     Comes with everything shown. Bushings, sleeves and grease.  Free Shipping!

    Add to Cart
  • 32 spline input for NP208

    NP208 32 spline input shaft

    Edit:  These are no longer a used part!  These are brand new!   32 spline input for the NP208.  This was pulled from a GM NP208c.  Perfect replacement if yours is damaged or you are converting another NP208 to go behind a...

  • Front D-shaft, used

    Front CUCV M1008 Driveshaft

    This is a front driveshaft from a GM CUCV Military M1008.  It will fit many others, including many civilian trucks with the TH400 and NP208 trans and T-case combo.  This is a used driveshaft.   

    Add to Cart
  • NP208c   Fully Rebuilt with top quality parts. NP208c   Fully Rebuilt with top quality parts.

    NP208 Fully Rebuilt Transfercase

    Notice:  These T-cases are built to order.  We generally try to keep a 32 and 27 spline ready to ship.     Fully rebuilt NP208 T-case.  This unit is a 32 spline input used in CUCV trucks as well as any GM truck behind the...

    Choose Options
  • 4l80E trans filter NSN2520-01-398-4589

    4L80E Automatic Transmission Filter

    NEW Old Stock.  4L80E transmission filter.  Some damage to packaging, filters are very serviceable.  Stock up and save, only a few left.   Note: does not include pan gasket ACDELCO 8684221   Originally intended for H1 HMMWV four...

    Add to Cart
  • Fixed Yoke NP205. Fixed Yoke NP205.

    TH400 and NP205

    NP205, Turbo 400 Rebuilt and takeout options.  Please contact us with your needs. Our stock on these varies daily.     We can ship, please contact us for a freight quote.