Product Description
Description
Torq Dana-60 14 Inch Big Brake Conversion Brackets
- Awesome Stopping Power
- Upgrades to 14 Inch Rotors and BIG Calipers
- Simple Conversion
- Works with GM/Dodge Kingpin Dana 60 Front Axle
- Fits Wheels 17″ or larger
Requires
- 17″ or larger wheels
- Machining the perimeter of your hub down approximately 0.120″
- SRW Hubs (Front Single Rear Wheel Width Hubs)
- OEM Dana 60 King Pin Hubs (aftermarket hubs require shimming to adjust hub offset)
- A GM or Dodge Kingpin Dana 60 SRW width front axle (will not work with ball joint axles)
If you own a King Pin GM or Dodge Dana 60 Steering axle and happen to be looking for better brakes this kit is for you. Our Big Brake Kit allow you to upgrade your Dana 60 to use 2009 and later Dodge 3500 14 Inch Rotors and Calipers. This kit has a number of added benefits. With a matched master cylinder the kit will easily lock up a set of 40 inch tires at highway speeds. The conversion is easy to do install. You also gain the benefit of having the Dodge 14 inch rotors slip over the hub once the installation is completed.
PLEASE NOTE- This conversion does require you to machine the outside diameter (outside perimeter surrounding the lug stud holes in the hub) to 7.850″. This is necessary to allow the rotor to slip over the hub.
Please contact use if you need hub machining, we can provide this service. Or purchase cut hubs here: GM Dana 60 SRW Hub
***These parts are for Off-Road use only! The CUSTOMER assumes liability for any use of this product on public or private roads.
NOT COMPATIBLE WITH DUALLY HUBS. We are looking for a solution for integration with dually hubs.
