This bracket welds onto a 3 1/4" and a 3 1/2" tube. The nubs are designed to easily grind off to fit the 3 1/2" axle tube. The bolt pattern is the stock full float 14 Bolt brake pattern and is made to bolt to 14 bolt disc brake brackets. These are 1/2" thick and the 4 mounting holes are threaded for 1/2" fine.
Sold in pairs
Popular Trending Products
The GM 14 bolt with all the mods you've dreamed of. Put this magazine quality axle under your …
This is the plate that goes under the rear axle (GM 14 bolt) and accepts the U-bolts. We have …
These new U-bolts are what you need to install a GM 14 bolt rear using a spring plate on top of the …
NEW OLD STOCK!! New OEM u-bolt plates This is the plate that goes under the rear axle (GM 14 bolt) …
This is a swap kit that will get your GM 14 bolt under your rig and puts the
If you have a 14 bolt, you need these seals! The original factory seals for the 14 bolt rely o…
GM 14 bolt, fully refurbished with disc brake conversion and your choice of gear ratio. 67" wms (whe…
Here we have a good used GM 14 Bolt Full floater hub. This is from a 10.5" ring gear axle.&nbs…
This is the listing for the bracket only. The default is a 14 bolt SRW (single rear wheel)&nbs…
